1. Feature & Application Objectives
Module Purpose:
The License page brings together the enterprise’s current product license information and subscribed products, including the licensed entity, activation and expiry dates, billing period, license status, credit balance, and, for each source, the subscribed quantity, devices in use, and devices available. From this page administrators enter “Activate Subscription” or “Change Subscription” to activate or change the subscription mid-cycle with the credit in the account.
Activation and change are two separate pages: enterprises without an active license (including trial-only and expired) use “Activate Subscription”; enterprises with an active license use “Change Subscription” for a mid-cycle change.
Subscription Rules:
The licensed device count is a hard limit: once the enrolled device count reaches it, new enrollments are blocked while enrolled devices are unaffected; add devices through “Change Subscription”;
The term (1 year / 3 years) cannot be changed once activated; a mid-cycle change keeps the current term and the expiration date;
A mid-cycle change can only upgrade the tier or add devices: only the current tier and higher are listed, and the device count can only be increased; the change takes effect immediately on confirmation;
To renew, downgrade, or reduce devices, submit a credit request with the request type “Renew” under Credit Management › Request Credit, to be confirmed by your service provider;
Once a formal subscription is activated, the trial license ends immediately and the device count follows the formal license.
Primary Operations:
Activate Subscription: choose product, term, and device count, and activate a formal subscription with credit;
Change Subscription: make a mid-cycle change (upgrade / add devices).
Secondary Operations:
View License Information: check the licensed entity, dates, status, and device usage of the current license.
Typical Use Cases:
Evaluation is complete during the trial and the formal subscription is activated directly in the console;
Store expansion is about to exhaust the device limit; after adding devices mid-term, new devices can enroll immediately;
The business needs more capabilities, so the tier is upgraded from iMin Essential to KC Enhanced mid-cycle.
2. Primary Operations
2.1 Activate Subscription
Description
Activate Subscription activates a formal subscription using the credit in the account. The administrator selects the product, term, and number of devices; the cost panel on the right shows the activation period, enrolled devices, credit per device, credit required, credit balance, and remaining in real time. On confirmation, credit is deducted immediately, the license takes effect at once, and the expiry date is the activation day plus the selected term.
Steps
Open the activation page
In the left navigation, click System Management > License ➊, then click Change Subscription ➋ at the top right; with a trial-only license this opens the “Activate Subscription” page directly.
Choose the plan
➊ Product: iMin Essential or KC Enhanced; click Product Compare to see the differences;
➋ Term: 1 year or 3 years;
➌ Device Count: the number of licensed devices, which cannot be lower than the current enrolled device count.
Check the cost
The Cost panel ➍ shows Type, Active Period, Enrolled Devices, Per Device, Cost This Time, Credit Balance, and Remaining. Per Device × Device Count = Cost This Time; a negative Remaining means the balance is insufficient.
Activate now
Click Activate Now and confirm; the license takes effect immediately. If “Insufficient Credit Balance” is shown, click Request Credit to submit a request to your service provider and return to this page once the credit arrives.
Notes
Devices cannot be fewer than the enrolled device count; iMin Essential cannot be selected while GMA devices are under management;
The term cannot be changed after activation; choose 3 years to lock in a longer term;
Re-activation after expiry starts from the activation day rather than continuing from the old expiry date.
2.2 Change Subscription
Description
Change Subscription lets an enterprise with an active license make a mid-cycle change: upgrade the tier (iMin Essential to KC Enhanced) or add devices. The left panel shows the Current License (product, term, number of devices, enrolled devices, expiration date, time remaining, credit balance), the middle section walks through the change step by step, and the Cost panel on the right shows the credit required in real time. On confirmation, credit is deducted and the change takes effect immediately; the expiration date is unchanged.
Steps
Open the change page
On System Management > License, click Change Subscription at the top right.
Choose what to change
➊ Change Type: Mid-cycle Change, upgrade the tier or add devices, effective immediately, expiration date unchanged;
➋ Product: only the current tier and higher are listed; click Product Compare to see the differences; if you are already on the highest tier, the product stays the same;
➌ Term: keeps the current term; a mid-cycle change does not alter it;
➍ Device Count After Change: enter the total device count after the change, which can only be higher than the current count.
Check the cost and confirm
The Cost panel ➎ shows Type, Active Period, Enrolled Devices, Monthly Allowance, Cost This Time, Credit Balance, and Remaining.
Click Confirm Change; the change takes effect immediately. If the credit is insufficient, click Request Credit to submit a request to your service provider and return to this page once the credit arrives.
Notes
A mid-cycle change cannot downgrade the tier or reduce devices, and does not alter the term or expiration date;
After adding devices, new devices can enroll immediately;
Confirm Change stays disabled until a device count is entered or a higher tier is selected.
3. Secondary Operations
3.1 View License Information
Description
The upper part of the License page, “Product License Information”, shows the licensee and license status; the lower part, “Subscribed Products”, lists Number Of Devices, Enrolled Devices, and Available Devices by source.
Steps
View the information
In the left navigation, click System Management > License and check Company Name, Company ID, Product Activation Date, Product Expiration Date, Time Zone, Payment Period, Product License Status, Credit Balance, and the subscribed product details.
4. Field Descriptions
Field | Description |
Company Name / Company ID | Name of the licensee and its unique ID on the platform. |
Product Activation Date / Product Expiration Date | Start and end of the current license. |
Time Zone | Time zone the license dates are based on. |
Payment Period | Term of the current license. |
Product License Status | Whether the current license is activated. |
Credit Balance | Credit currently available in the enterprise account, the same as on the Credit Management page. |
Source / Number Of Devices / Enrolled Devices / Available Devices | Subscribed product details: license source, licensed devices, enrolled devices, and remaining devices that can be enrolled. |
更新计划、拍板与待确认
# v1.3.7 帮助中心更新计划2026-09-29。按 v1.3.7 功能更新清单顺序,一个功能一组:功能介绍(Function Introduction)+ 操作手册(Operations Guide),中英同发,先草稿。格式照现有文章:功能介绍 = 功能概述 / 核心功能 / 价值与优势;操作手册 = 1. 功能与应用目标(模块功能定位、说明框、主要操作、次要操作、典型应用场景)/ 2. 主要操作 / 3. 次要操作(每项:操作说明、操作流程、注意事项)/ 4. 配置项说明。| # | v1.3.7 功能 | 帮助中心动作 | 落点 | 出处 | 控制台实测 ||---|---|---|---|---|---|| 1 | 通知中心 | **新建** 功能介绍《通知中心》+ **新建** 操作手册《通知中心》 | 功能介绍 / 系统管理(13854031);操作手册 / 系统管理(14637183) | PRD《KC-V1.3.5-链路追踪-通知中心》§5.1–5.3 + v1.3.7 清单 | /system/notification 列表、筛选值、详情弹窗已核 || 2 | 审批流程 · 邮件通知 | **暂不写**(0929 拍板:控制台找不到设置项,先不提,等研发确认后再补) | — | — | 系统设置 › 其他 › 审批流程开关只有 6 个开关,没有邮件通知的设置项 || 3 | 应用下发限制 · 按机构管理 | **新建** 功能介绍《应用下发限制》+ **新建** 操作手册《应用下发限制》(帮助中心此前一篇都没有,整功能补齐) | 功能介绍 / 配置管理(13835500);操作手册 / 配置管理(14114799) | 钉钉原型《应用下发限制》+ 控制台 | /config/applimit 列表、新建弹窗已核;**客户账号上没有「机构」字段**,限制范围只有 全部 / 分组 || 4 | 设备列表 · 最后在线时间 | **更新** 操作手册《设备列表 (KMA)》11756547 与《设备列表(GMA)》11781093 第 4 节配置项说明各加两行;功能介绍《设备列表》15039886「信息总览」加一句 | 原文不动,只加 | 控制台 | 设备列表 16 列里有「最后在线时间」「最后接入时间」两列 || 5 | 自助订阅(额度) | **新建** 功能介绍《额度管理》+ **新建** 操作手册《额度管理》;**新建** 操作手册《许可证》(开通 / 变更订阅入口在这一页) | 系统管理 | PRD 合并版第 3 册「客户订阅」5.1–5.4 + 控制台 | /system/mycredit、/system/license、开通订阅页、额度申请单、额度计算器已核;中文界面叫「额度」不叫 credit |## 0929 拍板- 样稿格式通过;五个功能的动作清单通过。- 控制台找不到的三处(审批邮件通知、通知中心邮件告警开关与阈值、应用下发限制「机构」字段)**先不写、不提**,陈卓去问研发。- 五个功能文字全写完、过目后一起建 Intercom 草稿,图后补。## 待确认(0929 第一轮已问过的三条见上,以下是写稿时新冒出来的)4. **「最后在线时间」与「最后接入时间」两列的准确定义**没有文档出处。我按字面写「设备最近一次在线的时间」「设备最近一次接入平台的时间」,要不要就这么写。5. **额度类文章的中文叫法**:控制台写「额度」「额度余额」「申请额度」,名词表 0910 也定了讲解材料中文 credit 一律写「额度」。文章标题用《额度管理》。英文照控制台英文界面(还没切英文核对)。6. **通知级别**:控制台目前只看到「失败」一种标签,PRD 里有 成功 / 部分失败 / 失败 三级。文章写「存在失败显示为失败,全部成功显示为成功」,成功标签的具体文字等英文切换时一起核。7. 英文界面用词(菜单名、按钮名)还没在控制台切英文核对,英文稿里的界面词先按中文直译,截图阶段切英文时统一核一遍。8. **应用下发限制的「编辑」「删除」按钮名**没实测到:账号里一条规则都没有,列表「操作」列是空的。手册按这个控制台的通例写了「编辑 / 删除」,要不要我在你账号里建一条测试规则截图后再删。9. **额度申请单的撤回**:PRD 写待确认的单可撤回,账号里没有申请单,「申请记录」的操作列没实测到。手册按 PRD 写了。10. **变更订阅页**(本期变更 / 续期)这个账号只有试用授权,点「变更订阅」直接进的是「开通订阅」页,变更页界面没看到,2.2 节按 PRD 第 3 册 5.2 写的。11. **额度申请单上的日期**:控制台现在叫「生效日期」,PRD 0928 已改名「期望变更日期」但线上没跟上。手册照线上写「生效日期」,线上改了再同步。




